Plain Refill Rolls
A plain green bag unwinds from the refill.
DISPENSER REFILLS
Custom Biodegradable Pet Waste Bags
A refill needs to turn freely in its holder and tear off one bag at a time. We make dog waste rolls to your bag size and count, with plain film or your own print.
Bags on perforated rollsFrom 1,000 pcsExisting samples free
The upright roll shows the outer wrap. The roll on its side shows the core opening, another measurement to check against your dispenser.
Bag Size, Roll Count and Dispenser Fit
- The minimum order is 1,000 individual bags.
- Specify the open bag dimensions, bags per roll and the type of dispenser you use.
- Choose plain film, a bag color or printed branding and instructions.
- We check the film thickness with the room a hand needs for pickup and tying.
- We do not currently have finished-pet-waste-bag compostability certificates or test reports.
How a Refill Roll Comes Together
Bag size and film thickness affect how many bags fit in a holder. A current refill and its dispenser give us a pair to measure.
Measure the Holder
Send the roll width and diameter, or the holder’s internal measurements. Allow room for the refill to turn as bags feed through the slot.
Make the Film
We blow the prepared compound into film and check its width, thickness and appearance before forming the bags.
Print between the Tear Lines
We place the logo and any instructions between the base seal and perforation so the entire design stays on the bag that tears off.
Seal, Perforate and Wind
We seal the bags, make the tear lines and wind the specified number onto each roll.
Try It One-Handed
Load the sample into the holder, pull out one bag and tear it off. Open and tie the bag to check how much room is left above the contents.
Count Bags and Refills
We check the number of bags on a roll and the number of rolls in each pack. Carton marks identify the refill size and quantity at receiving.
Refill Rolls and Retail Packs
Decide whether the customer is buying a refill for an existing holder or a bag-and-dispenser set. The samples also show ways to present a roll at retail.
Bag and Dispenser
The bag feeds through the opening in the matching dispenser.
Bone Print Rolls
The dark bone pattern repeats along the green film.
Window Box Packaging
A window in the box lets the buyer see the rolls.
Allow Space for Pickup and Tying
Put your hand inside the open sample, then try tying it above the contents. Allow for the sealed edge when setting the usable width and length.
- Opening width
Slide a hand into the open bag. Allow space to turn it over the contents after pickup. - Bag length
Leave enough usable length above the contents for closing the bag. - Film thickness
Give us the thickness in microns (µm), or send an existing refill to compare. - Clear measurements
Use millimeters (mm) for width and length, and distinguish the usable area from the sealed edge.
Bag Count Changes the Roll Diameter
More bags or thicker film can increase the finished diameter. Check the width and diameter of a wound sample in the actual holder.
- Bags per roll
Set the count for your refill format and selling unit. - Perforation
Pull the first bag through your dispenser and tear it off. Check the base seal on the next one. - Wound diameter
Measure across the full roll, including the outermost wrap. - Winding
Check how the finished roll feeds from the intended holder before approving it.
Use Your Dispenser as the Fit Reference
“Standard roll” does not specify a fit. Use our roll and dispenser guide to measure the holder, roll and clearance for rotation.
- Existing dispenser
Use your current dispenser or its internal measurements as the fit reference. - Clearance
Check the roll in the holder with the lid closed. It needs enough space to turn. - Feed opening
Check that a bag can be drawn through the opening without catching. - Bag-and-dispenser set
A portable dispenser can be paired with the rolls; confirm the selected combination in the sample.
Private-Label Color and Printing
Keep the logo and instructions clear of the seal and perforation. Review the wording on a separated bag as well as on the roll.
- Bag color
Choose the film color before checking how clearly an instruction or logo prints on it. - Logo printing
Place the brand mark on the bag with enough clear space around it. - Useful wording
Keep printed instructions short enough to read on the finished bag. - Environmental claims
Approve material and disposal wording only when it matches the supporting evidence.
Bags per Roll, Rolls per Pack, Packs per Carton
Write down the number of bags in one refill, the number of refills in the retail pack and the pack count for each carton.
- Rolls in a pack
State how many refills the buyer receives in one retail pack. - Bags in a refill
Give the bag count for each roll so we can work out the total number of bags. - Packs in a carton
Tell us how many retail packs your warehouse expects in each shipping carton. - Carton marks
Use your agreed product reference, design and count on the outer carton.
Film Choice and Used-Bag Disposal
A shopper needs the bag to open, hold the waste and tie shut. Any disposal advice must also take the dog waste itself into account.
Film for a Refill Roll
We can review PBAT/starch compounds and suitable PLA/PBAT/starch blends for the refill. Include the thickness, width, tear-off length and bag count in the quote.
Discuss the Compound
Comparing Your Current Refill Film
Try both the current roll and the proposed sample in the same dispenser. Pull a bag through the slot, tear it off, open it and tie it.
Review a Reference Roll
Evidence and Used-Bag Disposal
We currently have no compostability certificate or test report for the finished pet waste bag. Check the local waste service’s rules for dog waste before adding disposal instructions to a pack.
Discuss Required Evidence
Winding Dog Waste Bag Refills
We print the film if requested, seal the bags and perforate between them. We check that the bags separate at the tear line and that each roll holds the ordered count.
Pet Waste Bag Size & Thickness Guide
Choose a width and length that leave room for a hand and a knot. For refills, check the wound roll in its holder as well as the dimensions of the open bag.
We quote film thickness as the total of both bag walls in microns (µm). The table gives reference figures. Confirm how each was measured before using it for an order.
Swipe the table sideways to view every column.
| Bag format | Reference size (cm) | Reference thickness (µm) |
|---|---|---|
| Pet waste bag roll | 23 × 30 | 14 |
| Flat-top refill roll | 23 × 33 | 15 or 18 |
| Refill roll | 23 × 35 | 18 |
| Tie-handle side-gusset roll | (11.5 + 5.5 × 2) × 40.5 | 15 or 18 |
| Tie-handle roll; width includes gussets | 23 W × 32.5 H | 18 |
| Loose bags; width includes gussets | 30 W × 32.5 H | 20 |
Send a Refill or Dispenser Reference
Send a photo of the holder or current roll, the number of bags per roll and your total bag quantity. Shipping time is additional.
Get a Custom Quote1,000 pcs
Minimum order
3–5 days
Custom samples after payment
7–9 days
Production after payment
Pet Waste Bag Roll Ordering Questions
Check the width and diameter against your holder, then pull a bag through the slot. A roll that fits inside can still bind if there is too little room to turn.
The minimum is 1,000 individual bags. Give us a total bag quantity and a bag count per roll. We list the corresponding roll and pack counts in the quote.
Yes. Send the holder you have in mind, or ask us about a portable dispenser with the rolls. Try the sample refill in that holder before approving the set.
Keep dog waste out of ordinary backyard compost, as the EPA guidance advises. We currently have no home-compostability certification for these bags. Follow your local waste service’s instructions for filled bags.
Existing samples are free. A custom refill sample costs US$30–50 and takes 3–5 days after payment. We refund the full sample fee with a bulk order. Shipping is separate. See how to request and approve a sample.
Bulk production takes 7–9 days after payment, plus shipping. Confirm the print and the number of bags per roll and rolls per pack before winding begins. See the production checks and delivery process.